The opening and closing speed of the automatic door is controlled by the parameters set inside the controller, and the opening and closing speed of the automatic door can be adjusted by adjusting the parameters inside the controller. Generally speaking, the opening and closing speed of automatic doors can be adjusted according to needs to better adapt to different usage situations.

To adjust the opening and closing speed of the automatic door, first open the control box of the automatic door, and then find the parameter adjustment switch or knob. The position of the parameter adjustment switch or knob may vary depending on the specific model and brand, and there is usually an instruction manual or label to guide the operation. When adjusting, attention should be paid to safety. You can first disconnect the power supply or seek professional operation. Adjusting the opening and closing speed of an automatic door is a technical task that requires attention to the following points:

1. Adjustment range of opening and closing speed: Each automatic door controller has its specified adjustment range, which cannot be exceeded for adjustment to avoid damaging the controller or driver.

2. Testing during the adjustment process: After adjusting the opening and closing speed, multiple tests are required to verify whether it meets the requirements. It can be adjusted to a relatively low speed for testing, confirmed to be correct, and then gradually increased to a satisfactory speed.

3. Adjustment requirements for different occasions: The opening and closing speed of automatic doors may vary in different occasions. For example, a faster speed may be required at the entrance of busy shopping malls, while a slower speed may be required in hospitals or nursing homes. Therefore, adjustments should be made according to specific usage scenarios.

4. Maintenance and regular inspection after adjustment: Once the opening and closing speed is adjusted, it is necessary to ensure that the parameters in the controller are not operated incorrectly or reset to zero, so as not to affect normal use. Regular inspections are also required to ensure stable and normal opening and closing speeds.

Through the above methods, we can adjust the opening and closing speed of automatic doors, making them better adapt to the needs of different occasions, and improving the user experience and safety. I hope the above content is helpful to you.